New Replaced Remote Control fit for Dish Network 20.1 IR Satellite Receiver (Compatible with Dish Network 1 Only) -B08GHFC8W3
UPC: 786899997439
Brand: AMGUR
Manufacturer: AMGUR
About this item
- Brand new Replacement Remote Control for Dish 20.0 20.1 TV1 #1 Satellite Receiver. Our remotes are fully tested and work great
- The remote has no RF section and cannot be setup in SAT mode. So, If you have tried and the remote control can't work, press and hold the TV device button until the device lights up, enter the code 1005, and the device flashes twice, this indicates that the setup is finished
- The 20.1 remote is the upgrade for the 20.0 and contains more codes for Televisions. It can learn codes from other remotes
- No programming or paring needed. Just install new 2 AAA batteries and you're good to go
- Compatible with TV models: VIP 622, 722, 222, 522, 625, 942, 201, 211, 301, 311, 322, 351, 1000, 2200, 2700, 2800, 2900, 3000, 3200, 3700, 3800, 3900, 4000, 4100, 9200, 5200, 6000. 6100
Product description
The 20.1 will control all Dish receivers in IR mode. IR requires that you point the remote directly at the receiver. Newer receivers like the Hopper and Joey will need to be set to ir mode to use this remote since they originally shipped with a UHF remote that does not require direct line of sight with the receiver.
Kindly Note: Dish Network 20.1 TV1 #1 Satellite Receiver IR Remote Control compatible with most Dish Network and Bell Satellite Receivers. But it may not be able to control your other devices, such as LED TVs and speakers.
Compatible with Dish Network 20.1 TV1 #1 Satellite Receiver: VIP 622, 722, 222, 522, 625, 942, 201, 211, 301, 311, 322, 351, 1000, 2200, 2700, 2800, 2900, 3000, 3200, 3700, 3800, 3900, 4000, 4100, 9200, 5200, 6000, 6100, 6131, 6400, 9242 HD PVR etc.
IR Signals Only and Just Compatible for TV 1
This Dish Network remote control can only use IR signals. And it needs a clear line of sight between the remote and the receiver. Please make sure there is no obstacle when using the Dish Network replacement remote.
This is a Dish Network 20.1 TV1 #1 Satellite Receiver Remote Control and it does not surpport the UHF PRO function and not work for TV2. Please do not buy a wrong remote that not work for your device.
Package Content:
2x Remote Control ( Batteries are NOT included )
Kindly Note: This Dish Network 20.1 TV1 #1 Satellite Receiver IR Remote Control compatible with most Dish Network and Bell Satellite Receivers. But it may not be able to control your other devices, such as LED TVs and speakers.
